Application: Flooring,
wall covering, counter top, backsplash, spa.
*Results
from independent testing met and exceeded ASTM criteria set
forth by
ANSI
standards
for
commercial wall and floor applications. They passed
freeze-thaw testing, as well as resistance to chemical substances
including all common household and cleaning materials, swimming
pool
chemicals, hydrochloric acid solution and potassium hydroxide.
Additionally, the
floor tiles’ surface has a coefficient of friction
that
exceeds OSHA
standards.
Available
Sizes:
*6”x6”
Non-Tempered
*6”x8”
Non-Tempered
*8”x10”
Tempered
*12”x12”
Tempered and Non-Tempered
*12"
circular
*12"
x 15" cutting board
Tile
Thickness: 0.25 inches
ASTM
C1026: Tiles showed NO evidence
of freeze-thaw damage
after
completing 15 cycles of freeze thaw.
ASTM
C1028: Static
Coefficient of Friction Dry =.86 Wet =.52
ASTM
C373: Water
absorption rate of .37% = impervious
ASTM
C650:
Resistance
to Chemical Substances:
Not
affected by the following: Acetic Acid 3% & 10%;
Ammonium Chloride,
100
g/L; Citric Acid Solution, 30 g/L & 100g/L; Lactic
Acid, 5%;
Phosperic
Acid, 10%; Sulfamic Acid, 3% & 10%; Swimming
Pool Chemicals =
Sodium
Hypochlorite Solution, 20mg/L; Acids & Bases =
Hydrochloric
Acid
Solution,
3% & 18%; Potassium Hydroxide, 30 g/L & 100 g/L
ASTM
C485: Warpage
of Tile Edge warpage: .02%
Diagonal Warpage: 0.00%
ASTM
C499: Facial
dimensions and
thickness of tile
Average difference of
0.020 inches
ASTM
C502: Wedging
of Tile Average percent wedging was 0.03%
ASTM
C648: Average
breaking strength is
1931 lbf
Mohs’
Scratch Hardness: 5 (1-talc to 10-diamond)
Application: Backsplash,
shower, wall mural
Ceramic satin
finish tiles offer enhanced resilience and scratch resistance. Unsanded
grout
is recommended, and any commercially available adhesive for
ceramic tile
may be used. They can be cleaned with a household non-abrasive
cleaner and a soft cloth.
Available
Sizes:
*2.0" x 2.0"
*4.25" x 4.25"
*6”x6”
8"
x 10"
12" x 12"
Application: Decorative
Art and Photo Reproduction
Ceramic
gloss tiles are resistant to many chemicals, but are not
recommended
for
surfaces
subject to
direct abrasion. To
preserve this decorative tile, always use
non-abrasive
cloths
and cleansers.
Available
Sizes:
*2.0" x 2.0"
*4.25"
x 4.25"
*6”x6”
Application: Wall
covering,
border, decorative art.
Tumbled
stone is a compressed sandstone product that adds an "old-world"
look
to the
artwork. The tiles are very porous and must be sealed if used
in water
applications. Each tile is individually cut, causing
some variation
in colour,
texture, size and thickness, which may result in missing corners and/or
chipped edges in some tiles. You may
use standard adhesive
recommended for
tumbled stone tile. Sanded
or
unsanded grout may be used.
Available
Sizes:
*4.25" x 4.25"
*6”x6”
Tile
murals are numbered and
marked
for layout left to right and top
to
bottom. 1/16" grout lines
are
recommended to maintain image
perspective. Use silicone
grouts, as standard tile
grouts are very abrasive and
can scratch the
tiles if you trowel the
grout in. If you are incorporating
tiles into a tile
project
you can
use standard grouts. You can trowel the grout in
if
you mask
off the tiles first.
